CHEM 75 to 110 PP

Introduction

Developed to handle heavy corrosive fumes, vapours, contaminated air and aggressive gases. Impellers' diameters from 75mm to 110mm dia of thermoplastic such as PP, PE, PVC, PVDF etc. Can be blended with composites to overcoming high temperature, flame retardant resistant, ultraviolet or Electrostatic Discharge protection. Tested and rated in accordance with BSI and AMCA standards. Noise accordance to DIN 45635. Balanced in accordance with Grade G2.5 of BS 5625 Part 1 (1979). You may also email us to request for full catalogue and information    

Application

• pulp and paper	• wastewater-treatment	• fertilizer
• pharmaceutical	• metalplating	• laboratory fume hoods
• small plating and pickling operations	• etching processes	• chemical-fume scrubbers
• soil remediation

Operating Range

• Maximum CMH: 500	• Maximum Static Pressure: 400Pa	• Maximum Temperature: 80°
• Fan Sizes: 75mm to 100mm

Options

• Coat fan base	• Flanged outlet	• Drain
• Belt guard	• Motor and drive canopy	• Flex connector
• A/9 Motor and drive mounting	• Flanged inlet	• Flanged gasket
• Access door	• Shaft seal	• Transition
• Spark resistant construction

Feature

• Centrifugal fans, radial blade and radial tip wheel designs

• Smooth PP reduces friction and minimizes solids build-up

• Polypropylene composition impervious to extreme outside environments

• Performance data is the result of testing in accordance with AMCA standard test codes

Literature

  Bulletin:
   CHEM 75 to 110 PP Catalog
  Manual:
   Maintanence Manual